Axe Sheath pt 1

At the end of this month is a very important date. The Teacher’s wedding.  Because of certain circumstances I will be one of the groomsmen (which I’m quite happy about). The theme is sort of a fantasy/medieval styled thing and so many of the groomsmen will be wearing a sword or other weapon as well.

Personally, I don’t have any medieval style swords, but I do have a neat looking axe that I purchased at the Michigan Renaissance Festival.

(Forgive the poor quality picture, I’ll replace it later)

It’s beautiful and would be perfect! Except that it’s sharp and the frog I have places it uncomfortably close (and the bottom part (not pictured) scraped up my ankle pretty bad). So, Solution? Make a sheath of course! I grabbed some tools and some leather off of amazon and planned it out with my brother!

After the leather finally arrived I still wasn’t quite sure but now I’m in something of a time crunch so i need to get everything cut out so I can ship the axe down to The Teacher in time for the wedding!  My brother recently had his own wedding a few days ago so he won’t be able to help for this part of it however he did let me know I could use some of his old sewing supplies.  So I dug into that and gathered all the tools I figured I could use!

Here are all of the tools I’m planning to use, some mine some his. The ruler, pencil, awl, rotary cutter, stitching spacer, and needles are mine. Whereas the L-Square, big scissors, and soapstone are my bro’s. I haven’t used all of these tools yet, and I may add more but this is the list right now haha.

So I measured out the designs and started by cutting out a square that was around half an inch bigger than what I needed. Then I traced the shape of the blade onto the leather with the soapstone.  Once I had that I guestimated about an additional centimeter and drew freehanded the cutting lines. I checked it on the axe and started cutting!

Curves with the rotary cutter aren’t as easy as I’d hoped, but they’re a lot easier than using a box cutter like I did when I made my wallet. It didn’t seem to stretch out the leather at all and with a careful hand I ended up with my first piece ready!

As you can see, I also added an additional part for the axe to cut into so it won’t cut through my stitches later on!

I took this cut out, flipped it over and traced it to get the second piece! Which was a little tougher to cut out, and i’m pretty sure it’s nto completely even as of yet but it was starting to get dark so I wanted to get another rough part done before I tried to do any fine work. It’s much easier to see things under natural light than the kitchen light so after I finished the first part for the second bit of my axe I called it a night.

So next time I just have to fine tune some of the parts and make the final cutout for the second bit!  I still have some work to do with making a cover for the bottom weight but I feel pretty accomplished! After that I just have to figure out if I’m going to stitch it up with fake sinew, or waxed thread!

I’ve never used either so i’m not sure what to pick…

So if you’ve got any insights please comment below! Have you ever had a project to make something like this? Medieval styling or otherwise? Feel free to post any other questions or comments, I’d love to hear from you!

Almost a Year of Updates!!

Holy shit you guys, so much has happened since I last wrote I’ll try to quickly update y’all here.

In April The Translator (my girlfriend) came up and visited me for a week so I took the week off of work. It was fantastic, we went all over the place and saw an exhibit on Samurai at the DIA. We also marathoned all of the avengers movies and Agents of Shield before seeing Winter Soldier in theaters The Projectionist (Brother #3) was able to get us in for free haha. Naturally I was sad when she left but we had a great time.

May I tried to do some pallet projects but holy shit I do not have the tools for that. All I had was a few hammers and a mini crowbar. It took me an hour to remove 2 planks. Yeah not gonna happen. So eventually those got tossed, maybe someday when I have better tools. (like a fullsized crowbar or better yet a pallet-pal )  yeah yeah ‘shoddy workman blames his tools’ but man this shit isn’t gonna fly lol I need a better way.

June was pretty uneventful as far as I remember, I’d wanted to go camping during the summer but suffice to say it just plain didn’t happen.  Pops kinda doesn’t know where his camping stuff is and well, life gets a little hectic haha.  I was looking for an apartment but the only one in the right price range that wasn’t a complete dump was full so :T

July I went out to california to visit my family! There were good parts (like my mom buying me men’s clothing!!!) and bad parts (like having to exit my sister’s car at a stoplight because she was yelling at me so much) but overall it was good I think.  I got to hang out with my friends, go to the pier and beach, play with my niece, and I even got to go see The Translator again. We met up at Little Tokyo and it was a great time.

August was busy busy! Early in August The Artist and I went to Detroit’s Pagan Pride! It was super cool, we both got Tarot Readings (She was fantastic) it was hilarious because she would say something so spot on and The Artist and I would just look at each other and try not to laugh. I also finally picked up a Thor’s Hammer pendant for regular wear and another set of runes ahaha. It’s a problem. In any case The Artist had a great time as well and is slowly getting more interested in these kinds of things.   Towards the end of the month I took some vacation time and went down to Georgia to visit one of my best friends The Teacher. We also met up with a bunch of internet friends from a forum we were both on, unfortunately the forum died shortly before the visit. We also were going to DragonCon but I got sick :T  by the time the Convention rolled around I was super sick and couldn’t go.  Friends brought me back some souvenirs though so honestly my wallet was more upset about it than my heart haha.  I also discovered that I am absolutely in LOVE with Georgia.  The Teacher had mentioned before that I should move down there (Honestly idk if she was mostly joking or not) but after that visit I decided fuckyeah.

Now, I’d been considering moving for at least a few weeks before this but I HAVE SO MANY OPTIONS.  California, Wisconsin, Georgia or Japan if I was going to move, OR staying in Michigan.  Well, that’s too many options for a flake such as myself so I consulted my good friend The Witch. She did a massive Tarot reading for me that basically said I’d be cool anywhere except Cali (which honestly isn’t surprising at all).  But she said that if this were a reading done for her. She would absolutely pick Georgia.  I was still a little bit of a flake though until The Translator also got a reading and hers sounded like anywhere would be kinda rough. Except Georgia!  And then after going and having such a great time (Despite getting a terrible cold) IT WAS DECIDED!

September I was back in Michigan and ready to go to the Renaissance Festival! I met up with The Artist and her Fiance (who is also an artist) for the last weekend of the Michigan RenFest! We introduced her Fiance to Korean BBQ (which everyone loved) and then I did my first long driving excursion out to the Ren Fest on saturday!  We got only a little lost but The Artist said that my driving is getting better haha.  We had a great time and spent entirely too much money hahaha. I bought a $200 Axe and frog to carry it with.  Actually I also bought a small frog call too though come to think of it I don’t know where that is at… In any case it was a lot of fun and I’ll have to put some pictures up of that here at some point.  Also the truck I had been driving had become officially mine!  Pops and step-mom gave it to me 8D although since i plan to drive down to Georgia I knew I’d need a new one that could handle the drive.

October was pretty cool.  The weather started getting colder and since the truck was mine I felt more comfortable about using it all the time. The month itself was pretty uneventful but the weekend before halloween The Artist and her Fiance came up to my house and we were going to watch scary movies and go to a haunted house and everything.  So we went out on Saturday, introduced the Artist’s fiance to the BEST sushi. I mean, I lived in Southern California for like 3 years and this was THE BEST sushi I’ve ever eaten.  It’s this little hole in the wall sandwich place in downtown Mount Clemens, MI called Chantels Jailhouse Deli. Honestly I’ve only ever had their sushi but haha, it is delicious.  After that we walked around downtown there and there were the remnants of a little halloween festival going on. Kids were dressed up and trick or treating at the shops it was super cute.

Then we went to Gibraltar, for those who haven’t been it’s sort of like a giant fleamarket but all indoors.  Every so often they have special events such as gun and knife show, baseball cards, etc.  This weekend it happened to be the holistic Health Festival which was filled with stone vendors. It was a ton of fun and we even got Aura Chakra reports done which were really accurate and really interesting!  You put your hand on a thing where it takes your biometrics and the computer prints out a report and they talk to you about your aura and chakras and what it means and all that it was super cool.  One of the guys looks at it and comes up to me and is all “Looks like you’ve probably got a sore throat.”  and holy shit though haha I was complaining about it earlier that day.  So then we went out to go to the haunted house and… all three of us chickened out haha.  Since they were getting kinda worked up about it inside, I got kinda worked up about it too, and when The Artist and I turned to her fiance for  a final yes or no he was just kind of “Well, I’m not really feelin it.”  and it was kind of a big relief so we all went back to my house and watched the Conjuring instead lolol.

The next weekend for Halloween I got to drive down to The Artist’s house and stay there for the weekend! It was a LOT of fun and since she recently got kittens there was much cuddling haha. Actually it was because of the kittens that I went over there instead of having them come to my house for a 2nd weekend in a row, so they wouldn’t have to leave the kittens alone again. And also because I wanted to see them haha.  They had an extra bed they set up for me and we got to hang and talk a lot and drink a lot, it was a great time haha.

Unfortunately when I was driving back home it felt like the truck was really low compared to normal… and so on monday we took my truck in to the mechanic. All 4 springs/couplings were either cracked, broken, or gone!  That, paired with the muffler I needed to fix, and the transmission that was no good… well… it would have been a hefty bill.  I’m still looking for a car but it’s kind of rough. I only know some vague things that I’m looking for, and despite offering help once  my pops hasn’t really come through on that.  I don’t even know what budget I should aim for what kind of loan to get from the bank and ugh it’s a mess really.

So November has been full of that kind of stress. Thanksgiving wasn’t so bad as I got to see my grandmother and some relatives on my dad’s side.  Everyone liked my haircut that I was so nervous about haha.  I finally got a more masculine haircut so I was scared that they would make a big deal about it. But everyone just said it was cute on me so I’m really happy about that.  And that’s all that really happened last month.

And so we’ll see what happens in December!

I’ve got some other little projects in the works that I’ll hopefully get posts out about soon haha.

Getting (back) into Gunpla!

So recently my interest in Gundam Models (also called Gunpla) has been reignited!  I used to be sort of into it in high school. I made I think maybe 4-5 of them but I didn’t put an awful lot into it haha. I mostly just popped out the pieces by hand, cut tabs with an X-ACTO Knife and used a black 005 Micron Pen to draw in the panel lines. But man, was it fun.

This time around I’m getting some pointers from one of my big bros and am gonna be getting some additional proper tools. I’m also intending to try my hand at painting this time around, I’m less worried about messing up than I was in high school haha. I’ve been looking into it extensively as I figure out what tools and budget for it I’m really really excited!

Last saturday I went out and picked up some tools. (Well actually I went through my storage and found out I had most of the tools from when I took a jewelry-making class.The remaining items I picked up at michaels, coupons ftw.

The tools I have are as follows:

• A flush cutter (Something like the Xuron 170-II Micro-Shear Flush Cutter Which is what I planned to get until I found some at Michaels)
• Some Fine Point Tweezers
• Fine Sandpaper
• Some small/fine diamond files. This is much better than my set so I might upgrade someday haha. 12pc File Set 180-320 Grit
• An X-ACTO Pin Vise Set
• And lastly a Pentel GraphGear Automatic Drafting Pencil .3mm

All of which I can use for other projects as well :> The only one I don’t have is the .3mm pencil, which tbh I’m still waffling on. I hear they’re good to panel-line the hard-to-reach places but I don’t know if that’s going to be super necessary for me yet. I’ll probably pick one up when I need one haha.

So I ran around saturday trying to find tools most of which I did at least to the point where I’m ready to go! Now I just needed some gunpla kits! I looked at a couple places but they either didn’t have any models at all (ToysRus apparently stopped carrying them at some point ;o;), or had the realistic type models (Trains, Tanks, Planes, Ships, Cars, etc.  Cool stuff but not what I’m looking for haha.). The woman at ToysRus told me of 2 hobbyshops in the area and after being disappointed by the first one I didn’t look for the second (It had something about trains in the name so I figured it would be like the other one.) but I looked it up when I got home and they did have gundam models!  But by then it was already dark and really cold outside and I was comfortable so I put it off until sunday =u=;;

I’m also interested in painting them and kind of upping my game a lot from before so I called up one of my brothers because I found an old stash of model paints of his (He’s done gunpla and such but mostly repainted Action figures and things :> ). He moved out of state quite a while ago so I asked if I could use/have them and he said yes! Today I’m going to call up one of my other brothers and see if he still has any of his old airbrushing stuff. I know he was really into it a long-ass time ago but I don’t know if he kept up with it or not so I’m going to ask :>

As for the gunpla sets, on Sunday I had a short* list of what sets I wanted which there weren’t any on the website, but I was hoping they’d have more in store. They did but only a few. In the end I got OO Gundam Seven Sword SD and Gouf Custom! (I love the gouf design and when it came to the SD I just saw  it and couldn’t help myself)

*hahaha I’m lying it was like 20 sets long. I pretty much have all the sets I want to get written down in order of complexity so that I’ll hopefully be pretty good at it by the time I get to my more favored sets :>  After these I plan to get the uh Gunpla Starter Set of the RX-78-2 and Zaku II and maybe the old 1/144 Gundam X (as a practice one. I hear they’re pretty bad so this way I won’t feel bad if I fuck it up 8>) I really hope my skills will be where I want by the time I get to say, 1/144 Blaze Zaku Phantom (Dearka Elthman Custom)  or  1/144 Gundam Astray Red Frame(Flight Unit).

I’m really excited! And if you guys know of any good resources lemme know! I’ll definitely be making posts about them as I go, probably WIPs or just big ass build posts with lots of pictures :> It’s been a long time since I’ve wanted to do a hobby that didn’t have some kind of background practical reasons behind it. Most of my hobbies grew from practicality stuff or wanting to be able to sell things and it gets tedious haha; so… yeah it’s nice to indulge :>  I’ve already started working on the SD, so I’ll be posting pictures up of that once I finish (don’t worry there will be plenty of in-progress pictures too!)

**Disclaimer: All links are through my AmazonAssociate account, you can probably find the gundam model kits much cheaper elsewhere, and probably the tools cheaper at like electronics and craft stores and so on. For the record the tools I did buy I got at Michaels and I’d much rather look at local stores before resorting to the interwebs or I’ll be using Amazon Giftcards gotten for free from Swagbucks (This is my referral link too haha;;; you don’t have to sign up but it’s pretty cool I might make a post about it later on.) to get stuff on amazon.

Media Arcana, my shop!

So I probably should have posted about this much sooner, before the holiday probably would have been best haha;;  but on October 31st I opened up my new witchy shop Media Arcana!

You can click the image to go to the site! I’ll be selling all kinds of crafts and witchy or pagan things as I make them.

Media Arcana has been a dream of mine for well over a year, initially it was going to be a partnership between myself and another witch known most for her Tarot work. And so we made the name basically as a bit of wordplay. In Tarot there’s the Major Arcana and Minor Arcana.   Well, from there we found the word befitting ‘middle’ being Media and thus Media Arcana was born.  But, the shop wasn’t strictly tarot, and thankfully the phrase can have more than one meaning. Media of course being the plural form of medium which can also refer to various objects and techniques (such as when applied to art) and so on. And Arcana of course referring to mysteries and secrets, and y’know, magical stuff.

And that’s basically what I’ll be selling on Media Arcana,  magical stuff.

Now, right now you’ll notice there’s only a few items and services. I’ll expand the readings as I grow in confidence with more spreads and I’ll expand the charms once they’ve been a little bit more tested. All bindrunes that I sell will be tested and at the very least have worked for me in the past.

For example the favorable-exam bindrune [First one Here]. I used this to help me pass my driver’s test on my 4th time around. That’s when I passed haha.  I also used it when I felt unprepared for a test in a speech course I was in.  I got a 59/50 on that test. Suffice to say I feel confident in this charm and so that’s why I offer it for sale. The other charm, Increased Productivity, has a favorable review from The Artist (in fact she’s requested a permanent one) so I also feel confident enough to offer it for sale.

So anyways, I hope to be making/testing/selling more items soon and if you follow this blog you’ll probably see a lot more in-progress pictures and things than you will at the official Media Arcana tumblr but there and twitter is where you’ll hear about new in-stock items first!

Wallet-Making Take 2

So, I didn’t have enough left of that nice thick dark leather that I was planning to make my billfold wallet out of. But I do have this lighter, thinner leather that I think would make a nice minimalist pocket style wallet.

Something like the Journeyman offered by Tanner Goods [Here] would be ideal.

Seriously go take a look at that fancy shit, it’s beautiful. Now obviously I’m not expecting mine to come out so nicely. After all this is my first time doing any sort of leatherwork really. You can’t expect to paint a masterpiece the first time you pick up a brush :U  In any case I decided to base my design off of this since it looks easy enough, and being mechanically minded as I am I figured how it’s put together pretty easily.

For my wallet, just cut up two pieces and matched them up as best I could but uh… Now I know why the pros use a hydraulic press with a cutting mold, whereas I used a metal straightedge and a box cutter. So the mirror image isn’t exactly there, close enough though.  Next I cut up two more sheets to act as the outside ‘pockets’.  One I accidentally cut horribly short  and while I realized that I could totally flip it and make a sort of sideways pocket, I opted for the lazy/minimalist option and decided that one outside ‘pocket’ was good enough for me P:

Next came the all important part of puncturing the leather for the needle and thread to get through!

I pulled out my awl and mowed through the bottom edge of my first big piece, using only the awl and a whack with the palm of my hand. Now I know why the pros also have either strong ass sewing machines or a the very least rawhide mallets. Ow. So then I realized that I had to make sure somehow that these would line up right with the other pieces.

For the first line I just lined up the pieces as well as I could, inside out, and stuck my sewing needle through the holes in my first piece, to lightly puncture the second piece. I would use these little holes as a reference were to place the awl and punch through.

 

You can see pretty good the difference in size of the awl holes and the needle marks. The next step was to pin the corners together using some thumbtacks pops had lying around and poke the rest of the holes to match the second piece, and then follow suit with the sides of the pockets that would get stitching.

The thread I’m using is a durable heavyduty thread in a sort of steely silver that I’ve used in the past to stitch simple book bindings early last year (the books didn’t warrant such a thread but my mother was pretty adamant). And I think it’ll contrast nicely with the color of leather that I have. So after punching through the leather scraps, it was time to sew them together!

I did this by hand as I don’t have any kind of sewing machine at the moment, not to mention i don’t even know you can do this kind of thing with a sewing machine. The stitching may not be perfect but it’s more than strong enough to hold this thing together hopefully for a long time! Or at least long enough for me to purchase more leather and try again =D

 

Now, unfortunately when I got to the ends I had no idea how to knot them up properly. So I just tried to wing it. But uh… That proved itself a bad idea pretty quick as one of the knots started coming undone immediately. So I resorted to supergluing the knots into place.  Next time I’ll put more research into that part =w=;;;.

It should hold for a good while though and I can re-stitch it if need be. The only thing I need to figure out now is sealing the outside edges together so they don’t pull up. I noticed when I put them in my pocket one of the layers on the corner likes to catch and pull up so I’ll have to figure out how that’s done.

But, a project  completed and I’m super pleased with the result!

 

Technical difficulties with analog crafts

So I had some scrap leather I purchased (though if I’d known just how ‘scrap’ it was I never would have paid money for it.) and I recently read this post by artofmanliness.com. So, having some energy and free time this evening I decided to try my hand at it! I printed out the blueprints full size and cut the D piece out of my nicest biggest scrap using a simple box cutter.  I had one of those nice fiskar self-healing cutting mats underneath it too. It started pretty well and my cuts were clean… but then I noticed something…

It was WAY TOO SMALL!

Now, this piece is supposed to be the outermost layer of the wallet and thus the biggest piece. When I realized that it was roughly the size of a dollar, I also realized i had made a horrible mistake.  Upon rechecking things out I found out that what I printed was pretty much completely off-scale and to top it off, after realizing this, adjusting, and checking it against my scraps again, I didn’t have any solid scraps big enough for that largest piece :T

So suffice to say I’m a bit disappointed, and I’ve added Leather to the list of things I’m going to buy when I get paid haha.

Although I’ll be checking my other pieces to see if I can’t make another type. Maybe a phone pocket slim wallet or something other than a billfold but we’ll see!